Thermostatic shower mixer MK-07X

Same as Thermostatic shower mixer MK-07, same material, same design. The difference is that the two outlets of MK-07X are located below the mixer. This design is more in line with the needs of users who use hoses to connect the shower nozzle.

Product description:

This is where the MOCQUE thermostatic shower mixer range comes in. We want to make it simple to save water and energy. With smart technology, the thermostatic mixer makes this simple.

Thanks to the thermostatic mixer that your shower water is not affected if someone turns on the water in the kitchen. You can calmly continue singing in the shower ― without the risk of being burned or getting a cold shock. The mixers also have a 38°C safety stop button, so there's no risk of you or any child accidentally raising the temperature.

When you set the temperature, the thermostatic mixer into the outlet by adjusting the proportion of hot and cold water, the effluent temperature is always constant, in a very short period of time will automatically balance the cold and hot water pressure to maintain water temperature stable, eliminating the need for manual adjustment. Saving water, convenient and safe.

This Bath/Shower Mixer is thermostatic allowing the user to control the temperature from the bar valve. The valve is designed and manufactured by leading bathroom brand MOCQUE, MOCQUE deliver high quality products at great value. The valve is complete with a diverter to control function between tap and shower. The outlet connection is located on the bottom/Base of the valve. Comes with option for Deck Mounting or Wall Mounting.

Specification

Outlet water temperature range 20-50°C
Safety button temperature 38°C
Recommended pressure 0.1MPa-0.5MPa
Cold water supply temperature 5-29 °C
Hot water supply temperature 55-85 °C
Size of inlet G 3/4
Size of outlet G 1/2
The distance between the hot water inlet and cold water inlet is 150mm.
Length 45mm*2
Diameter 60mm
Height 20mm
Inner bore 25mm
Seat diameter 20mm
Weight 1777g
Material Chrome-plated Brass
Working Requirements: For this shower to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance.
PICTURE MODEL MAERIAL FUNCTIONS and FEATURES INSTALLATION MODE HOT and COLD DISTANCE
MK-07 Brass 1.The left side handle adjusts the amount of water
2.The right side handle adjusts the temperature
Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding
3.Pull the handle in the middle to switch the water position
4.Water outlet: upward, Diameter 20 mm
5.Water inlet: Diameter 25 mm
The hot and cold water pipes are inside the wall Center distance is 15cm Normal waterway: Facing the wall, hot left and cold right
MK-07X Brass 1.The left side handle adjusts the amount of water
2.The right side handle adjusts the temperature
Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding
3.Pull the handle in the middle to switch the water position
4.Water outlet: upward, Diameter 20 mm
5.Water inlet: Diameter 25 mm
The hot and cold water pipes are inside the wall Center distance is 15cm Normal waterway: Facing the wall, hot left and cold right
MK-0703 Brass 1.The left side handle adjusts the amount of water
2.The right side handle adjusts the temperature
Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding
3.Pull the handle in the middle to switch the water position
4.Water outlet: upward, Diameter 20 mm
5.Water inlet: Diameter 25 mm
The hot and cold water pipes are inside the wall Center distance is 15cm Normal waterway: Facing the wall, hot left and cold right

Inquiry

Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
Home Tel Mail Inquiry