On the basis of MK-09B, the surface has been spray-painted, there are two kinds of gold and silver. Other colors can be customized. The plastic used for the mixer body is more durable than metal.
This is where the MOCQUE thermostatic shower mixer range comes in. We want to make it simple to save water and energy. With smart technology, the thermostatic mixer makes this simple.
Thanks to the thermostatic mixer that your shower water is not affected if someone turns on the water in the kitchen. You can calmly continue singing in the shower ― without the risk of being burned or getting a cold shock. The mixers also have a 38°C safety stop button, so there's no risk of you or any child accidentally raising the temperature.
When you set the temperature, the thermostatic mixer into the outlet by adjusting the proportion of hot and cold water, the effluent temperature is always constant, in a very short period of time will automatically balance the cold and hot water pressure to maintain water temperature stable, eliminating the need for manual adjustment. Saving water, convenient and safe.
Plastic shell, lighter, more corrosion resistant and more durable.
Compared with the metal style, the biggest advantage of this mixer is that it can be disassembled to clean the inside of the mixer and the core components of the mixer can be replaced. More economical and more practical, start from practical ideas. Thoroughly solve the problems of thermostatic mixers being easily blocked and core components failure, and each mixer is provided with a temperature sensing component as a spare.
Outlet water temperature range | 20-50°C |
Safety button temperature | 38°C |
Recommended pressure | 0.1MPa-0.5MPa |
Cold water supply temperature | 5-29 °C |
Hot water supply temperature | 55-85 °C |
Size of inlet | G 3/4 |
Size of outlet | G 1/2 |
The distance between the hot water inlet and cold water inlet is | 150mm. |
Length | 45mm*2 |
Diameter | 60 |
Height | 20 |
Inner bore | 25mm |
Seat diameter | 20mm |
Weight | 964g |
Material | Chrome-plated Brass |
Working Requirements | For this shower to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance. |
PICTURE | MODEL | MAERIAL | FUNCTIONS and FEATURES | INSTALLATION MODE | HOT and COLD DISTANCE |
![]() |
MK-09J | Plastic | 1.The left side handle adjusts the amount of water 2.The right side handle adjusts the temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.Water outlet: upward, Diameter 20 mm 4.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
![]() |
MK-09Y | Plastic | 1.The left side handle adjusts the amount of water 2.The right side handle adjusts the temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.Water outlet: upward, Diameter 20 mm 4.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
![]() |
MK-09B | Plastic | 1.The left side handle adjusts the amount of water 2.The right side handle adjusts the temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.Water outlet: upward, Diameter 20 mm 4.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
![]() |
MK-09SBX | Plastic | 1.The left side handle adjusts the amount of water 2.The right side handle adjusts the temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.Water outlet: upward, Diameter 20 mm 4.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
![]() |
MK-09BX | Plastic | 1.The left side handle adjusts the amount of water 2.The right side handle adjusts the temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.Rotate the handle on the left to switch the water position 4.Water outlet: upward, Diameter 20 mm 5.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, left hot and right cold |
![]() |
MK-37J | Plastic | 1. The middle handle controls the water outlet and closing 2. The lower handle controls the outlet water temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.The position of temperature regulating handle can be disassembled and cleaned 4.Water outlet: upward, Diameter 20 mm 5.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
![]() |
MK-37Y | Plastic | 1. The middle handle controls the water outlet and closing 2. The lower handle controls the outlet water temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.The position of temperature regulating handle can be disassembled and cleaned 4.Water outlet: upward, Diameter 20 mm 5.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
![]() |
MK-37B | Plastic | 1. The middle handle controls the water outlet and closing 2. The lower handle controls the outlet water temperature Red button: the temperature above 38 ℃ needs to be adjusted by pressing and holding 3.The position of temperature regulating handle can be disassembled and cleaned 4.Water outlet: upward, Diameter 20 mm 5.Water inlet: Diameter 25 mm |
The hot and cold water pipes are inside the wall Center distance is 15cm | Normal waterway: Facing the wall, hot left and cold right |
Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.