Thermostatic shower mixer MK-D06J

On the basis of MK-D05, the function that can be disassembled and cleaned is added. On the right side of the mixer, there are four screws on the temperature adjustment knob, which can be loosened to clean the inside of the mixer or replace the core components.

Product Description:

This is where the MOCQUE thermostatic shower mixer range comes in. We want to make it simple to save water and energy. With smart technology, the thermostatic mixer makes this simple.

Thanks to the thermostatic mixer that your shower water is not affected if someone turns on the water in the kitchen. You can calmly continue singing in the shower ― without the risk of being burned or getting a cold shock. The mixers also have a 38°C safety stop button, so there's no risk of you or any child accidentally raising the temperature.

When you set the temperature, the thermostatic mixer into the outlet by adjusting the proportion of hot and cold water, the effluent temperature is always constant, in a very short period of time will automatically balance the cold and hot water pressure to maintain water temperature stable, eliminating the need for manual adjustment. Saving water, convenient and safe.

His is a special type for electric water heaters. It is directly connected under the electric water heater to keep the outlet water temperature stable. After installation, the problem of constant temperature water in the entire room can be solved. The upgraded mixer can be disassembled and cleaned for easy maintenance, and there will be a spare core component with the shipment.

Specification

Outlet water temperature range 20-50°C
Safety button temperature 38°C
Recommended pressure 0.1MPa-0.5MPa
Cold water supply temperature 5-29 °C
Hot water supply temperature 55-85 °C
Size of inlet G 1/2
Size of outlet G 1/2
The distance between the hot water inlet and cold water inlet is 100mm.
Weight 835g
Material Chrome-plated Brass
Working Requirements For this shower to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance.
PICTURE MODEL MAERIAL FUNCTIONS and FEATURES INSTALLATION MODE
MK-D05J Plastic 1.The left side handle adjusts the amount of water
2.The right side handle adjusts the temperature
3.Water outlet: upward, Diameter 20 mm
4.Water inlet: Diameter 20 mm
Center distance 10cm
MK-D06J Plastic 1.The left side handle adjusts the amount of water
2.The right side handle adjusts the temperature
3.The position of temperature regulating handle can be disassembled and cleaned
4.Water outlet: upward, Diameter 20 mm
5.Water inlet: Diameter 20 mm
Center distance 10cm
MK-D07J ALLOY 1.The left side handle adjusts the amount of water
2.The right side handle adjusts the temperature
3.The position of temperature regulating handle can be disassembled and cleaned
4.Water outlet: upward, Diameter 20 mm
5.Water inlet: Diameter 20 mm
Center distance 10cm

Inquiry

Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.

  • *
  • *
  • *
Home Tel Mail Inquiry