MK-HJ03 is a classic style. The design is simple and generous, without too many edges and corners. The whole faucet is made of copper, and the outer side is multi-layer electroplating. It has good corrosion resistance and oxidation resistance.
In addition, the valve has a separate downward outlet, which can be used to drain water to the bathtub or wash clothes, which is convenient and practical.
On the basis of keeping a round appearance, we redesigned the interior of the valve. We increased the width of the channel inside, so that the water volume of the valve becomes larger.
If you don't want to use the thermostatic shower faucet, you can take a look at this one. A very traditional and classic style. Turn the middle handle to control the proportion of hot and cold water. We believe that this design will bring you a better shower experience. Imagine that when you take a bath, more water rushes onto your body. It will be a new experience.
|Outlet water temperature range||0-100°C|
|Cold water supply temperature||0-30 °C|
|Hot water supply temperature||55-99 °C|
|Size of inlet||G 3/4|
|Size of outlet||G 1/2|
|The distance between the hot water inlet and cold water inlet||150mm|
|Separate down outlet||one|
|Adjustment mode||rotating handle|
|Working Requirements||For this shower to operate efficiently your water system will need to produce at least 0.5 bar of pressure, though we recommend 1.0 bar for best performance.|
Please Feel free to give your inquiry in the form below.we will reply you in 24 hours.